If you have lost your Nikai Air Conditioner remote control or want to control multiple Air Conditioners with a single remote, you have come to the right place. All universal remotes can control multiple Air Conditioners in your home if you program them with a compatible code. This post will discuss universal remote codes for your Nikai Air Conditioner and its programming instructions. When you use a universal remote for your Air Conditioner, it controls the device using infrared signals.

Universal remote control for all types of Air Conditioners, such as mini AC, window AC, portable AC, and other models. As well as, universal remotes have multiple advanced features that make your work more accessible, and you can have all the original benefits of your original remote in the Air Conditioner universal remote control.

How To Setup My Nikai Air Conditioner Remote

Several universal AC remote remotes are available to control Nikai Air Conditioner, which can also be affordable. All universal remotes have a set of codes based on the Air Conditioner brand and model. If you are looking to set up a universal remote for your Nikai Air conditioner, you must have universal remote codes that connect the remote to the device accurately without any errors.

Purchase the most popular universal remote to control and note down the remote codes based on your Air Conditioner brand and model. If the universal remote recommends multiple codes for a single device, note down all the codes on paper, or you can find the codes in this post. Try first during the remote programming. If the first code doesn’t work, you can try the remaining codes while programming your remote control.

1. Insert new batteries into the Air Conditioner universal remote.
2. Turn on your Nikai Air Conditioner and keep it in Standby mode.
3. Point the remote control at the AC signal window from an appropriate distance and press the “SET” or “SETUP” button until the LED light turns on your remote.
4. Using the “+” and “-” buttons on the remote control, select the code.
5. Press the “ENTER” button on your remote when the correct matches on the remote display.
6. After this, control the Air Conditioner to check the remote functions. Increase and decrease temperature and change swing modes. Your remote is ready to use if all the functions work as expected.
7. If not, try to reprogram your remote using a different code until you control your Nikai Air Conditioner with the universal remote.

Use this exact method to program other Air Conditioners to set up a universal remote control to the device.

Nikai AC Universal Remote Code List

Nikai AC universal remote codes are unique and multiple. You can see several types of codes recommended for the Nikai AC. However, all the codes may not work until you find a valid code, as mentioned in the programming instructions. When you enter a code on the universal remote during the setup, the remote recognizes the Air Conditioner model and enables functions in the remote control. Note down these codes or take a screenshot to program your universal remote to program.

0658

0142

0060

0660

if these codes not work then you can simple follow above guide to program without using any remote codes

How to Reset Nikai AC Remote

You can reset your Nikai AC remote by removing batteries from the remote for 10 minutes and pressing the “POWER” button on the remote. After this, insert batteries into the remote and press the “POWER” button again until the flashing LED light confirms the remote reset to factory settings.

Conclusion:

Universal remote controllers have multiple advanced features and can control multiple Air conditioners when you program the remote for each device, but the multiple device capability is limited up to 6 to 8 devices. You must find the valid codes based on your device and brand before programming the remote and follow the instructions mentioned earlier in this post. If you have any doubts or errors, leave a message in the comment box. We will try to answer you.